Xantrex Freedom XC PRO Inverter/Charger 12vDC in 120vAC Out.
Couldn't load pickup availability
Description
Description
Xantrex Freedom XC Pro Inverter/Chargers
Model:
-
Freedom XC Pro 2000: 2000W True Sinewave Inverter with 100A Charger,
Model 818-2010 -
Freedom XC Pro 3000: 3000W True Sinewave Inverter with 150A Charger,
Model 818-3010
Product Description
The Xantrex Freedom XC Pro series represents the most versatile AC power solutions with RV-C and J1939 protocol support, delivering true sine wave output, extended 2X surge rating for 5 seconds to handle motor loads like A/C and refrigerators, and programmable multi-stage charging optimized for lithium ion batteries including LiFePO4. Featuring ignition control to minimize battery drain, wide 10-18 VDC input for high-voltage alternators, programmable AC under-voltage shutdown for weak shore/generator power, power factor corrected charging, dead battery recovery down to 0 Vdc, and power share functionality. The 3000W model includes a built-in 50A transfer relay while both offer quick-connect terminals, compact lightweight design, and full output from -4°F to 104°F.
Key Features
-
True sine wave output for sensitive electronics and motor loads
-
Extended surge: 2X continuous power for 5 seconds
-
Ignition control via 12 VDC signal minimizes battery drain
-
Programmable AC under-voltage shutdown (85-110 VAC) for weak power sources
-
Power factor corrected, 3-stage temperature compensated charging up to 18V
-
Supports lithium ion batteries with easy configuration and battery equalization
-
Dead battery charging down to 0 Vdc; power share prioritizes AC loads
-
RV-C/J1939 protocols; 30A (2000W) or 50A (3000W) transfer relays
Comparison Table
| Feature | Freedom XC Pro 2000 (818-2010) | Freedom XC Pro 3000 (818-3010) |
|---|---|---|
| Continuous Power | 2000 W | 3000 W |
| Surge Power | 4000 W (≤5 sec) | 6000 W (≤5 sec) |
| Battery Charger Current | 100 A (selectable 5-100A) | 150 A (selectable 5-150A) |
| Output Waveform | True Sine Wave | True Sine Wave |
| Transfer Relay | 30 A surge / 24 A continuous | 50 A surge / 40 A continuous |
| DC Input Voltage Range | 10.1-18.0 VDC | 10.1-18.0 VDC |
| Peak Efficiency | 91% | 91% |
| Full Load Efficiency | ≥86% | ≥84% |
| Dimensions (L x W x H w/o flanges) | 15.4 x 10.8 x 4.9" (390x275x125 mm) | 15.4 x 10.8 x 4.9" (390x275x125 mm) |
| Operating Temperature | -4 to 140°F (-20 to 60°C) | -4 to 140°F (-20 to 60°C) |
What's In The Box
-
One Xantrex Freedom XC Pro inverter/charger (model as ordered)
-
Owner's manual
-
Pre-installed DC ground enclosure lug
-
Plastic bushings for large DC cables
-
2 AC knockout hole plugs

Have a question?
Notified by email when this product becomes available
